Sleep Screen in Grid 3

Forums NeuroNode Troubleshooting and How-To Trilogy Sleep Screen in Grid 3

  • February 12, 2020 at 3:05 pm

    What does Sleep screen do?
    The Sleep screen command allows the user to turn off the device screen to save
    battery while the device is not in use. Once activated, the screen will switch off, but the
    device will remain active.

    Note: You can use either the NeuroNode or Eye Gaze to wake up the screen.

    Configuring Sleep screen
    1. Start Grid 3.
    2. Open Eye Control/NeuroNode 3.0/ NeuroNode Trilogy User.
    3. Go to Settings.
    4. Click Computer.
    5. In Sleep screen settings you can configure how long the user needs to gaze at the
    screen to wake it up.
    6. Click Ok.
    7. Close Grid 3.

    Testing “Sleep Screen”
    1. Start Grid 3.
    2. Open Eye Control/NeuroNode 3.0/ NeuroNode Trilogy User.
    3. Go to Fast Talker 3.
    4. Select the right arrow (->).
    5. Click the cogwheel.
    6. Select “Sleep Screen”. The screen should go off.
    7. To turn the screen on, gaze at the centre of the screen or make a switch with the
    NeuroNode.

     

    PDF of this post: Sleep screen command in Grid 3