Changing the label for Auditory Scanning in Grid 3

Forums NeuroNode Troubleshooting and How-To Trilogy Changing the label for Auditory Scanning in Grid 3

  • January 23, 2020 at 3:55 pm

    In order to change the auditory response for Write command Cells used in Auditory scanning a few options need to be set outside of the Grid 3 settings so you can update the auditory label on specific Cells.

    1. Select the Grid Set you are trying to update
    2. Go to Menu > Edit Grid
    3. Select the Cell you want to update
    4. In the “Write” command  on the left hand side there is an option for “Same as Cell Label”. Make sure this setting is turned off.
    5. Select the “Grid” tab at the top
    6. Select “Audio Highlighting”
    7. You can now change the Auditory Label on that cell so it will respond with the desired word/phrase
      1. Note this is only to change the response when scanning. What is input and spoken when selected is still done through the “Write” command on the left.

    Other Cells that don’t have the Write command tied to it should be able to make changes in Auditory Highlighting without doing the above steps.

    March 18, 2020 at 12:28 am

    Got it – thanks Chris